1 WAY containers

PE drums

This is a clean, chemical-resistant plastic drum made of high-density polyethylene.
Single layer, multi-layer, closed type, open type, etc. are available.

Single-layer HDPE drums

This single-layer HDPE power drum is a resin drum used for various chemicals.

[Characteristics]

• Blow air and particles inside the container are thoroughly controlled.
• HDPE is colored and durability and light shielding is also enhanced.
• Lighter and easier to handle than steel drums.

Two-layer HDPE drums

Pure drums made of two-layer HDPE are manufactured unmanned in a Class 100 environment, with two-layer molding, which provides high quality and cleanliness with less elution.

[Characteristics]

• Manufactured on an unmanned production line under a Class 100 FED standard environment.
• Particles in the clean room, blow air, and inside the container are thoroughly controlled.
• With two layers of colored resin and natural resin, they have excellent durability, light shielding, and cleanliness.
• High clean HDPE material, which has a proven track record in various chemical solutions and is made in Japan, is used.
• Lighter and easier to handle than steel drums.

※Various HDPE drums are available for pumping

Dedicated coupling that enables transportation with an insertion tube set in the drum, and fluid management using a connector.

Open drums

Openable top panel that makes it excellent for storing powders and other materials.
Highly airtight. Uses include transporting and storing industrial chemicals, paints, food, pharmaceuticals, etc.

Chemical drums

It is a composite container formed of a chemical-resistant polyethylene inner container protected by a steel drum.

This composite drum consists of an exterior protected by a JIS-compliant steel drum and an interior with a chemical-resistant, highly clean HDPE liner.

[Characteristics]

・The liner is made of highly clean material and molded by blow air under particle control.
・The container combines a steel exterior and HDPE liner. It has cleared a pressure resistance test of 300KPa, demonstrating its suitability for ammonia water and other chemicals that tend to put pressure on the container.
・It can be used for chemicals of container class X and specific gravity up to 1.4.

IBC containers

Medium and large-sized shipping containers for valve transportation of semiconductor high-purity chemicals. This saves space and contributes to better storage and loading efficiency than is available with drums.
It meets the IMDG Code requirements as a container for transporting dangerous goods and can be used for international transportation of both dangerous and non-dangerous goods.

IBC medium-sized containers are better storage and loading efficiency than drums.
They meet IMDG Code requirements for containers in terms of the transport of dangerous goods, and can be used to transport both dangerous and non-dangerous goods internationally.
It also meets the standards of the Fire Service Act for domestic transportation, thus providing safe and low-cost transportation of hazardous materials, various chemicals, food products, etc.
The raw material used is ultra-high-molecular-weight high-density polyethylene, which gives excellent chemical resistance and impact strength.

Small / Reagent bottles

Highly-clean small/reagent bottles with high cleanliness used for prototypes, etc.

We provide a range of small bottles for lab size, chemical evaluation, and storage samples for mass production. Materials: HDPE, stainless steel, fluoroplastic, etc. 
UN-compatible materials are also available upon request.
Capacity:0.1L-20L